{"id":4013785,"date":"2021-07-30T02:00:00","date_gmt":"2021-07-30T07:00:00","guid":{"rendered":"https:\/\/housecaravan.com\/?p=4013785"},"modified":"2021-12-09T05:15:02","modified_gmt":"2021-12-09T10:15:02","slug":"do-you-prime-before-whitewashing","status":"publish","type":"post","link":"https:\/\/housecaravan.com\/do-you-prime-before-whitewashing\/","title":{"rendered":"Do You Prime before Whitewashing?"},"content":{"rendered":"

This article discusses if you need to prime before whitewashing. Whitewashing is similar to painting in terms of application. However, it is easier and faster to do. While preparing your furniture for whitewashing, you might have wondered if you need to prime it. To help you get started with your whitewashing project, we will discuss this question below.<\/p>\n

Do you prime before whitewashing? You do not need to prime before whitewashing. It is also recommended that you do not apply primer to the wood. Primer is made for painting and not whitewashing. If you prime a wood, it will obscure the grain. On the other hand, you can use an oil-based primer if you need to prime other surfaces like walls and bricks.<\/strong><\/p>\n

How do you prepare wood for whitewashing? Do you have to sand before whitewashing? How do you whitewash wood paneling? Can you whitewash with colored paint? These are some of the questions that we will discuss. Check out the rest of the article below for more tips and information.<\/p>\n\n\n

\"Do
Photo by Markus Spiske<\/a> on Unsplash<\/a><\/figcaption><\/figure><\/div>\n\n\n

What is Whitewashing?<\/h2>\n

Whitewashing furniture creates the appearance of weathered wood. The whitewash provides a vintage and rustic look into the wood which looks like the white wood stain is applied on the furniture.<\/strong> It is a good alternative to painting and is also easy to do.<\/p>\n

How to Prepare Wood before Whitewashing<\/h2>\n

To prepare wood for whitewashing, you need to sand and clean it. This will remove stains, dust, dirt, paint, and varnish from the wood. By sanding the wood, the whitewash will easily adhere to it. Do not whitewash a wood without removing the varnish or paint first because it can prevent the whitewash from sticking into the wood.<\/strong> Below are the steps on how to prepare the wood before whitewashing.<\/p>\n

Sand the Wood<\/h3>\n

Do this process like you would when painting. Use the 150 grit sandpaper to remove stains and to even out the texture of the wood. This type of grit is rough enough to scuff the surface without scratching it up. Make sure to work in the same direction as the grain and put even pressure to avoid wood depression in various areas.<\/p>\n

Clean the Wood<\/h3>\n

Once you have sand the wood, the next step is to clean it. Wipe the wood with a wet sponge or rag to remove any residue. Make sure to thoroughly clean the surface of the wood.<\/p>\n

How to Whitewash Wood Paneling<\/h2>\n

There are a few steps that you need to do when it comes to whitewashing wood paneling which includes sanding, cleaning, and applying the whitewash.<\/strong> Let us learn more about these steps below.<\/p>\n

Step 1 \u2013 Preparing the Wood<\/h3>\n

Prepare the wood by sanding to remove any stain and existing paint on it. Take note that wood paneling tends to be smooth which means that you can easily create a rough surface to help the paint stick into it. Use 220-grit sandpaper<\/a> for sanding.<\/p>\n

Step 2 \u2013 Cleaning the Wood<\/h3>\n

The next step is cleaning the wood to remove any dust from sanding as well as the dirt that has accumulated over time. Create a cleaning solution by mixing a bucket of warm water and dish detergent. You can also use specialty products that are designed to clean wood paneling. Allow the wood to dry thoroughly.<\/p>\n

Step 3 \u2013 Applying Whitewash<\/h3>\n

The last step is to apply whitewash into the wood. Make sure to cover the floor to prevent whitewash from spilling into it. Create the whitewash using the traditional method which includes lime and salt. You can also use diluted paint. Carefully apply the whitewash into the wood and allow it to dry. You can add another layer if you want to make the whitewash thicker.<\/p>\n

How to Whitewash Furniture<\/h2>\n

To whitewash furniture, you can water-based paint or masonry lime. Use a half and half mixture of lime and water or paint and water. You can add more water if you want a thin consistency of whitewash. To have a unique look into your furniture, you can apply a layer of colored paint into it before you apply the whitewash.<\/strong> This way, the colored paint will show through the whitewash and adds a whimsical look to it.<\/p>\n

Make sure to clean the furniture before and allow it to thoroughly dry before whitewashing. Use paint to apply the whitewash on the furniture and dab it with rags. Allow it to dry so you can determine if you need to add another layer or not.<\/p>\n

\u2705 Video – How to Whitewash & Distress Furniture: DIY Farmhouse Coffee Table (Easy & Budget-Friendly)<\/h3>\n

Taralynn McNitt shared the video below on how to whitewash and distress furniture. The video shows how to whitewash a farmhouse coffee table. It is an easy and affordable method that you can do for your furniture. Check out the video for more tips and ideas.<\/p>\n\n\n

\n